WQS FRACAS Report is expected to realize the function, which the formulas result can use sort order.

April 16, 2017, 6:51 pm

≫ Next: who will add deliverable to activity

≪ Previous: Can we do 'Save As' on a Non-CAD document(.pdf, .doc) in windchill?

In the report , we can use the report calculation formula to calculate such as percentage. but we can't sort by the percentage. Our customer hope they can display failures in the report from high to low by the percentage.(one (Number of failures of assembly /Total Failures of the product).

Steps to Reproduce

1.Open FRACAS Design File.

2.Choose 'Formulas' from 'Insert' menu, WQS FRACAS appears formula form(as figure1. in attachment).

3.Edit 'Count ' and 'Percentage' calculation formulas(as figure 2. figure 3. figure 4. in attachment).

4.Load the calculation formulas to the report.(as figure 5.in attachment).

5.Print review the report.

The result picture is shown as figure 6.

↧

who will add deliverable to activity

April 16, 2017, 11:30 pm

≫ Next: Auto Routing in Windchill Projectlink

≪ Previous: WQS FRACAS Report is expected to realize the function, which the formulas result can use sort order.

hello everyone

i have created one activity say (submit design doc) and added user1 as owner and user2 as resource, now i am adding a deliverable to this activity and i want user2 to add deliverable , but when i add user2 as owner in deliverable , then automatically activity owner is changed to user2, how can i manage that activity owner is user1 and deliverable added by user2

kindly provide the solution

thanks and regards

Nimish

↧

Auto Routing in Windchill Projectlink

April 16, 2017, 8:02 pm

≫ Next: Add Content Task fails with "No content input stream available"

≪ Previous: who will add deliverable to activity

Dear All,

Currently we have Windchill Projectlink which is implemented to manage the Project across the Cross Functional teams. I have populated all the activities and RACI has been done and now we have it running in a perfect condition

My concern is:

1. For every document being uploaded and added as deliverables (documents are essentially, word, excel, igs, pdf and ppt and not other data), we have to route it manually for approval or release.

Is there any possible way to get it done automatically for the documents uploaded in Projectlink.

Reason for asking:

Sometimes the users upload the document and set the track work to 100% before getting it to approval stage. Also I would like to ask, if an activity is set as complete, but as an admin I know it is not. Is it possible to revert it back and make users to rework on it.

Thanks in Advance

↧

Add Content Task fails with "No content input stream available"

August 10, 2011, 3:51 pm

≫ Next: FamilyTable Generic and Instances can be checked in even after denying Modify Content on EPMDocument

≪ Previous: Auto Routing in Windchill Projectlink

I am using a stand alone Java app to run IE tasks. (Java app based on RunTask.java example in WC 8.0 Customization using IE Tasks) I am not using a Java SOAP client. I think the issue has something to do with task delegation and using a dispatch task but have not found an example that provides a clear picture.

The error:

(com.ptc.core.adapter.server.impl.implResource/12) wt.util.WTException: No content input stream available.
at com.ptc.core.adapter.server.impl.AddContentItemsWebjectDelegate.invoke(AddContentItemsWebjectDelegate.java:397)
at com.ptc.core.adapter.server.impl.WebjectDelegateFactory.invokeDelegate(WebjectDelegateFactory.java:434)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at wt.method.WTAdapterImpl.processWebject(WTAdapterImpl.java:749)
at wt.method.WTAdapterImpl.processRequest(WTAdapterImpl.java:475)
at com.infoengine.au.SocketAccess$SocketThread.run(SocketAccess.java:1254)

Any help is appreciated.

↧

FamilyTable Generic and Instances can be checked in even after denying Modify Content on EPMDocument

April 17, 2017, 8:06 am

≫ Next: PTC Windchill 11.0 Service Pack - Invalid CD

≪ Previous: Add Content Task fails with "No content input stream available"

Just saw this on the daily email update and found it strange:

https://support.ptc.com/appserver/cs/view/solution.jsp?source=subscription&n=CS137027

Has anyone else tested this behavior? Any idea why deny not working would be considered "working to spec."?

↧

PTC Windchill 11.0 Service Pack - Invalid CD

April 17, 2017, 10:31 am

≫ Next: Search returns in Windchill

≪ Previous: FamilyTable Generic and Instances can be checked in even after denying Modify Content on EPMDocument

I am installing Windchill11.0. and all of the packages are latest version from PTC software download web site. when attempting to copy service pack to the staging folder, it says "Invalid CD selected. Please select another CD". And all of the others copy correctly. the service pack I download is “PTC Windchill 11.0 Service Pack - Critical Patch Sets Bundles M020 =>> MED-61006-CD-110_M020_M020-CPS04-Bundle.” any ideas?

↧

Search returns in Windchill

April 18, 2017, 6:23 am

≫ Next: My Master is at Windchill 11 MO20 and replication site is at Windchill 10.2 F00 will Replication work?

≪ Previous: PTC Windchill 11.0 Service Pack - Invalid CD

Community,

Does anyone know if there is a way to block search returns by state or other criteria but still allow a user to navigate and look/download the objects if needed? We are in the middle of the tier 4 redesign and at some point would like to not have any tier 3 info return when a user (certain users only - maybe by role) search for something.

↧

My Master is at Windchill 11 MO20 and replication site is at Windchill 10.2 F00 will Replication work?

April 18, 2017, 4:18 am

≫ Next: Update Query Builder Report - Windchill Shell

≪ Previous: Search returns in Windchill

My Master is at Windchill 11 MO20 and replication site is at Windchill 10.2 F00 will Replication work?

What M and F stands for in MO20 and F00 respectively?

↧

Update Query Builder Report - Windchill Shell

April 12, 2017, 1:38 am

≫ Next: Windchill WVS CAD Worker for SolidWorks - server / workstation OS

≪ Previous: My Master is at Windchill 11 MO20 and replication site is at Windchill 10.2 F00 will Replication work?

Hello,

Does anyone know what the command is (if there is one) to edit reports in the query builder using the Windchill shell?

Ideally I'd like to be able to completely replace a report already in the Query Builder with a .qml file, but still keep the original report ID.

If this isn't possible, does anyone know the command to just upload a new report to the Query Builder in the form of a .qml file (I'm fairly sure that this is possible as I believe I've done it before)?

Any help is greatly appreciated!

Many thanks,

↧

Windchill WVS CAD Worker for SolidWorks - server / workstation OS

January 4, 2017, 10:29 am

≫ Next: New Change Notice Workflow not being used

≪ Previous: Update Query Builder Report - Windchill Shell

All of our servers are moving to the cloud (Amazon web services - AWS). We currently publish SolidWorks using a server configured as Win 7 - works perfectly.

There seem to be some restrictions on configuring an AWS WV host with a workstation OS. The WGM installer simply won't start on a server OS. We've asked for an AWS host with Win 7 (or 8.1 is listed as being supported) with no luck from IT so far.

Question: For everyone who currently publishes SolidWorks data, how are you managing the CAD Worker for SolidWorks?

↧

New Change Notice Workflow not being used

April 18, 2017, 5:03 am

≫ Next: Retrieve Windchill role of a given user into ThingWorx

≪ Previous: Windchill WVS CAD Worker for SolidWorks - server / workstation OS

I'm nearing the end of the development of a new Change Notice workflow with a new set of Change Activities. It's similar enough to the one we've been using for the past couple of years that I figured 'no problem'. Of course, now that I've arrived at the place where I have to do some testing, I can't even get off the fist step.

Workflows are created.

Policies are set.

Teams have been verified.

Lifecycles are defined and linked to the correct workflows.

Types are set.

When I start a new Change Notice, I get a choice to use the old one or the new one. If I pick the old one, it works as expected. During the creation of the Implementation Plan, if I pick the old one, it works as expected.

During each of these steps, both the old and new choices are shown (showing the Policy is working as expected).

When I start a new Change notice but instead pick the new workflow from the pull-down menu, it uses the old workflow. When I pick a new workflow for the Implementation Plan, it uses the old workflow.

I've gone over and over different aspects, but obviously I'm missing something else here. I'm hoping another set of eyes will point me in a direction of something I forgot to check on.

↧

Retrieve Windchill role of a given user into ThingWorx

April 19, 2017, 8:20 am

≫ Next: Workflow Task: Limit list of users in the drop down for a WTUser variable

≪ Previous: New Change Notice Workflow not being used

I need to retrieve some data from Windchill into ThingWorx. To begin with, am trying to fetch the Windchill role of a given user, into ThingWorx either using REST services or InfoEngine Tasks (webject xml). But the REST APIs found in Windchill documentation have less or no samples. Please help us.

Thanks

Avinash

↧

Workflow Task: Limit list of users in the drop down for a WTUser variable

April 18, 2017, 10:28 pm

≫ Next: Creo Drawing Appears Different in Creo View

≪ Previous: Retrieve Windchill role of a given user into ThingWorx

Hello Gurus,

I hope you can help me.

I have a requirement to show a variable (of type WTUser) with a drop down in the workflow task.

I have create a workflow variable of type wt.org.WTUser and made it visible, which is rendered with a drop down.

However, the drop down lists all the users in the LDAP.

How can I limit it to show only few users programmatically (e.g. the users in the role "Design Engineer" for the team instance)?

Any idea what to customize?

Thanks

Antonio

↧

Creo Drawing Appears Different in Creo View

April 18, 2017, 1:51 pm

≫ Next: I have modified OIR of an object but it is not reflecting

≪ Previous: Workflow Task: Limit list of users in the drop down for a WTUser variable

Please help me understand why my Creo drawings are not appearing the same as my drawing representation in Creo View. I have multiple drawings of parts and assemblies that are experiencing this issue. Here are the descriptions of the Creo View versions that are messed up: The first has removed all of the dimensions. The second and third, which are assemblies, have added rogue BOM balloons. In one drawing, the BOM balloon is linked to an item, but does not appear on the Creo side. In the other, the balloon appears to be unrelated to anything and has a "..." inside. The fourth drawing has removed dimensions and even hole features from the creo part. I don't think that this is a layer issue or an issue even within Creo, but the rogue balloon linked to an item makes me suspicious. I actually think that it is a representations/annotations issue in Windchill. From the drawing information window, I found Representations/Annotations under the content tab. In this window there is a default representation linked to Creo View and includes the undesirable view. It does not appear that I am able to modify this representation. I can only delete it, but after I do that then I have no Creo View option for the drawing at all. Is anyone familiar with this issue? How do I get Creo View to display the exact same information that I am showing on my .drw file?

I appreciate any help that you may be able to provide,

Nick

↧

I have modified OIR of an object but it is not reflecting

April 19, 2017, 11:03 pm

≫ Next: Got an error while installing Windchill 11 on Windows 7.

≪ Previous: Creo Drawing Appears Different in Creo View

hi viewers,

I have modified the OIR of a Part type related to numbering. But it is not reflecting while I am going for creation of new part.

why it is happening...?

↧

Got an error while installing Windchill 11 on Windows 7.

April 19, 2017, 10:01 pm

≫ Next: Change Request Input from multiple users

≪ Previous: I have modified OIR of an object but it is not reflecting

Hi Guys,

I have got an error while installing Windchill 11 on Windows 7 OS. I have attached the screen shots of the error i got after clicking 'Install' button again and again. Kindly help me to get resolved it so that i can install the software easily on my PC.

Kindly review my attached screen shots and log files for an error.

Thanks,

Sunil Chauhan

↧

Change Request Input from multiple users

April 20, 2017, 3:26 am

≫ Next: Is there a way to retrieve Role of a given user in Windchil with the help of Rest api or Info* Engine Task(webject xml)?

≪ Previous: Got an error while installing Windchill 11 on Windows 7.

Has anybody any suggestions as to what object to use within a Change Request to gain impact inputs by multiple functions who may be affected by the change before final approval of the CR is granted?

E.g. When when Function A raises a CR, it is decided that Function B and C will be impacted, and will need to provide an input to the CR before it is granted approval at the CRB stage.

I want to give the Change Admin the ability to send out an object or action to these Functions to enter their inputs, and receive notification once complete, so they can schedule CRB. And I would like these inputs to be non-visible to the other functions, but visible to the Change Admin and other admin users.

I have looked at using an action item, but this is non-subtypeable,and not sure if each one can be access controlled to the specific group of users. Would the Change Analysis or Change Proposal object be able to fulfill this need, or are these objects only applicable in earlier versions of Windchill?

Another other suggestions, or similar examples would be appreciated.

I am currently using Windchill 10.2

Thanks

↧

Is there a way to retrieve Role of a given user in Windchil with the help of Rest api or Info* Engine Task(webject xml)?

April 20, 2017, 3:41 am

≫ Next: Syntax error in ELEMENT parameter

≪ Previous: Change Request Input from multiple users

We are trying to pull data from Windchill into Thingworx, either using REST services or InfoEngine Tasks (webject xml). But the REST APIs found in the windchill documentation have less or no samples. Please help us.

↧