I think this has been knocked around a bit already but, does anyone know if this is possible?
We are about to upload over 3k documents from WC9 into WC10.
In WC10 I have created a lot more document types and sub-types and my guess is that someone will say that a document or two should be changed to a different type (after its imported).
Other than creating the document again, it would be helpful to just change the type.
Hi,
I try to rename or open some assemblies on Windchill and gives me a fatal error message.
What could be the reason??
Thanks for the attention.
Best reguards.
Luca
Can anyone provide some assistance as to why we are getting the following MS log error message when trying to run a Cognos report:
<ns1:message><messageString>RQP-DEF-0177 An error occurred while performing operation 'sqlScrollBulkFetch' status='-121'.</messageString></ns1:message><ns1:message><messageString>DPR-ERR-2082 An error has occurred. Please contact your administrator. The complete error has been logged by CAF with SecureErrorID:2015-05-27-06:00:23.298-#394</messageString></ns1:message>
When I attached files to change notices I often get the "submit the change object now?" prompt shown below. Is there a way to turn off this prompt?
10.1 M040
In our manufacturing process we perform some testing and the results are recorded in a document. We want to manage this document inside of Windchill as a reference document. We also want to link this document to the corresponding WTPart. However, the WTPart is in the RELEASED state and therefore cannot be modified to link the document. Has anyone else had this requirement and if so how did you solve it?
My first thought would be to create an event listener that prevents the checkout and iteration of the WTPart if this specific type of reference document is being linked. However during my research I am finding it difficult to find the right event or events to veto.
Thanks,
Patrick Williams
Greetings Gurus,
Scenario: Engineer creates a structure (CAD or Product) including Part A in the assembly. Later the Engineer changes the BOM to replace Part A with Part B in the structure. I need to be able to record the event that Part A superseded Part B, capture it in an attribute "Superseded By" and send it to ERP.
Is anyone out there doing something like this? Does Windchill even track anything like this?
Comments appreciated.
Thanks in advance.
Cam
This past weekend we updated our Windchill System from 10.2 M020 to 10.2 M030 CPS02. Since then we have been experiencing significantly slow performance with multiple Method Servers becoming deadlocked and the DB maxing out.
Is anyone here running 10.2 M030 CPS02 and have/are you experiencing similar issues?
I have a sub-type for WTChangeOrder2 (Change Notice) and for WTChangeActivity2 (Change Activity) workflows. The main (non-sub-) type for each is the Engineering Dept release process. The sub-type for each is Manufacturing's 'production release'. Each of the two workflows uses different roles and responsible people so, naturally, each needs to have different permissions for the various stages (states).
Everything is working as I wanted it to in testing so now it's time to do up the Policy for all the various roles in each workflow.
My dilemma is about the priority of policy concerning main types and sub-types. Here is what i have.
When I get Policy set for WTChangeOrder2, does that override any policy set for MfgECO?
Or does MfgECO override WTChangeOrder2?
I assume MfgECO would inherit any policy settings from WTChangeOrder2 if I forget to set it in the sub-type, but correct me if I'm wrong.
Any traps I should be aware of?
i created an advanced lifecycle and attached workflows to it now i need to expressions or java code which is to be written on expression robot to terminate from lifecycle when it is routed to that robot? please help me
After running the upgrade manager successfully (9.1M050 to 10.0M030) Windchill home page shows the error
HTTP Status 404 - /Windchill/netmarkets/jsp/netmarkets/overview.jsp
Description: The requested resource is not available.
The overview.jsp page is not present in the above location on the 10M030 system, but is present on the 9.1 system at /codebase/netmarkets/jsp/netmarkets/overview.jsp . Tried using the same file in target, but that did not work. Could not find any property anywhere referring to the specific page either. How do we avoid this error showing up?
For two different languages what can change between two .rbInfo files? constant value? the display? the order in the list? the key? the selectable flag?
What can the following code be used to do?
public class trainingResource extends WTListResourceBundle{
@RBEntry("hello, {0}!!!")
@RBComment("Bundle \"hello world\" example")
@RBArgComment0("a noun")
public static final String HELLO="0";
}
can it Define a new localized value or is it missing the @RBUUID annotation on the class?
I'm looking for older versions of the software matrices for Windchill PDMLink and unable to find them. For example - 10.1 F000, 10.1 M010, 10.1 M020.
I have seen them before but cant find them now. What am I missing?
Thanks,
Madhavi
Hello
Is there any way in Windchill to export and Import team templates.?
Note that i am looking to export team created at Site/Org-->Utilities->Team Administration not context team.(not specific context team...).
Regards
Giridhar
Hi!
I want to use setContext() method in the running Wfprocess, but it's not set new data to the process. How can I do it?
I am adding some sign-off actions to our change request workflow. I have created some new roles from the Organization roles menu item. That was easy. Now I need to assign users or groups from the LDAP to those roles. I looked on the team template page, but the new role does not show up with the site roles. How do I get to the role to add part5icipants to it?
Secondly, I need to add the role to the participants tab of the workfloe action item. Again, my added role does not show up in the list of roles? I now I can use an LDAP group or individual name(s) in that tab, but I would prefer using the role as that is the intent of what the Windchill developers thought should be used, I think. How do I get the role to show up in the list of roles on the particpants tab so I can select it?
I received new models/drawings with the same file name as others on Windchill. I would like ot keep the file names/numbers the same becouse the new files are one revision higher. Ho w do I keep the files names/numbers the same but with different Rev?
Is it possible to have an automation for batch verification of the parts are checked into the PDM or not?
Created a userpicker in a custom datautility and regiseterd it on a string attribute. Picker renders correctly in UI. On selecting user clicking finish windchill throws error for custom callback function saying that we cannot set value for null. Also mc.getRawValue() always returns null in the below code.
//Get datavalue method of datautilty
public Object getDataValue(String component_id, Object object, ModelContext mc) throws WTException {
buildUserPickerConfig(component_id, mc);
Object localObject = null;
System.out.println(mc.getRawValue());
if (mc.getRawValue() != null)
{
localObject = mc.getRawValue();
defaultProps.put(PickerRenderConfigs.DEFAULT_HIDDEN_VALUE, localObject.toString());
} else
{
localObject = "";
}
PickerInputComponent pic = new PickerInputComponent("UserPicker",localObject.toString(), defaultProps);
pic.setColumnName(component_id);
return pic;
}
//Callback JS
function userPickerCallback(objects, pickerID)
{
var updateHiddenField = document.getElementById(pickerID);
alert(updateHiddenField);
var myJSONObjects = objects.pickedObject;
for(var i=0; i< myJSONObjects.length;i++) {
var oid = myJSONObjects[i].oid;
alert(oid);
// Here “fullName” is the displayAttribute requested
updateHiddenField.value=oid;
}
}
Error Screenshot.
Hi,
I'm looking for possible ways to create a hyperlink to the edit problem report dialog in a workflow assignment.
The edit dialog should preferable open in a new window.
In other Words, users should only be one click away from editing a problem report, with the current assignment in the background.
Please let me know if more info is needed,
We are on Windchill 10.1.
Thanks.