Hello,
I can't set the number to folders in common space!
Thanks
↧
How to set the number to folders?
↧
Locking objects in Windchill 10 promotion request workflow template
Hello,
I am trying to modify our promotion request template which was copied from the OOTB windchill one to lock objects when they are raised up for promotion,a dn then unlocked after they are approved by config management approvers. I have a call into PTC tech support but they are dragging their feet as usual getting back to me. Does anyone have insight into how this can be done. I know that it is some type of robot, and from reading the help, it says you must use tranistion robots in conjuction with the locks, but I am just having trouble putting it all together. The default template contains locks, and unlocks already but not in the places I need them. I tried to copy them and put in line, but something just is not working right. Any help would be greatly appreciated.
Thank you in advance for your assistance,
Buddy Hudson
CAD/PDM Adminstrator
Atlas Copco Drilling Solutions
↧
↧
Can somebody give an idea of whats in Windchill 10.1 OOTB Options and Variants
We have been new to windchill, and we are slowly exploring available options in Windchill OOTB. When i put myself on the role of options manager, i found "options pool" tab in details page of project. Can somebody explain me how this works in OOTB.
I have some idea of options and variants but how is this put up in OOTB.
Any help is appreciable.
↧
Windchill Bulk Migrator 4.0 Discussion Page
Hello Everybody,
Welcome to the Windchill Bulk Migrator 4.0 Discussion Page. Feel free to talk, ask questions, share your experiences on the Windchill Bulk Migrator topic. Also, news and updates on this subject will be posted here as well.
Enjoy!
↧
Windchill Bulk Migrator load CONTENTMETADATA?
I try to load the CONTENTMETADATA of WTDocument using Windchill Bulk Migrator 4 siurce and target system is WC 10.2 M020.
When I executed PreloadValidation command using UI for CONTENTMETADATA
windchill com.ptc.windchill.migration.wbm.preloadvalidator.ui.PreLoadValidationManager
status of staged objects in table CONTENTMETADATAWBMSTATUS is succesfull
next step i executed
windchill com.ptc.windchill.migration.wbm.DataLoadController -l CONTENTMETADATA WTDocument
result:
Query to be run - SELECT staging.sequencenumber AS SEQUENCENUMBER ,staging.type AS CLASS FROM CONTENTMETADATA staging, CONTENTMETADATAWBMStatus st WHERE staging.migrated =0 AND staging.sequencenumber = st.sequencenumber AND st.POSTVERIFICATIONSTATUS IS NULL AND st.loadstatus = 'STARTED'
2015-03-21 20:01:17,531 INFO [pool-1-thread-1] com.ptc.windchill.migration.wbm.util.ReconcilationHelper$ReconcilationTask - There is no data mismatch to be reconciled for object type CONTENTMETADATA
2015-03-21 20:01:17,531 DEBUG [pool-1-thread-1] com.ptc.windchill.migration.wbm.util.ReconcilationHelper$ReconcilationTask
when I saw in db Table CONTENTMETADATAWBMStatus st.loadstatus = 'SUCCESS'
witch command i must execute to change st.loadstatus = 'SUCCESS' on st.loadstatus = 'STARTED'.
I can execute SQL UPDATE ))), but I think that is not correct and I shoud exec some Bulk migrator command witch doesn't documented(((.
May be sombody can post sequence of nesasary step to migrate content of WTDocument from WC 10.2 to WC 10.2 using Bulk Migrator 4 tool?
I do all as writed in official document, but don't get migrated content. With other types all ok,
↧
↧
Restore Part Autonumbering
I am trying to enable autonumbering in a library context. Our entire site has autonumbering disabled as the result of some old customizations and a rehost. I've got an autonumbering rule that works within the context if the Site level OIR is disabled, but when both the Site and Context rules are enabled, I get an Oracle error as follows:
ORA-01400: cannot insert null into ("PDMLINKY4"."WTPARTMASTER"."WTPARTNUMBER")
I'm not much of a programmer and cutting and pasting tags is a pretty random approach for this kind of work, so I'm wondering if anyone has a rule they could share that would fit into the OIR scheme in such a way that it could be enabled at a context level and override a site level part numbering rule.
Thanks in advance.
↧
Windchill
Every time I try to access Windchill it pulls up an error message. Why is this?
↧
How can I put Creo/Proe Listener for Check In Command from Creo Parametric.
I want to do some processing with CAD Model before Check In event of CADModel from Creo Parametric. Any help around how I can put Listener on Pre Check in from Creo Parametric.
Note: - If it has to be done using JLink APIs, I have good understanding of
Jink API
↧
preserve the state by using send to PDM
Hello,
Is it possibly to preserve the Object state by using send to PDM?
After sending an object from ProjectLink to PDMLink the state of ProjectLink should be included.
Is it possible to control the "Send to PDM" action via ACL?
THX and Greetings,
Thomas
↧
↧
Opinion of the integration PDMLink and Creo
I love both tools PDMLink and Creo. The basic interface works. But by now I would expect some real new features from PTC. I still can't belief why these two major programs of PTC can't get a better and deeper interface. The following examples show my considerations:
This includes that if a new CAD-Document is being created in Creo by the File->New Dialog, all the attributes are automatically being pulled from PDM. So the Material, the values of enumerations etc. are being managed in one single system.
This will also address the idea
Having a single "Material" Business Object in Windchill
Revising
If an engineer revises the CAD-Document there is no help to collect the Drawing or the WTPart. Instead of the Creo Dialog it should show the PDMLink collector dialog. Otherwise the user needs to revise the WTPart by itself.
Also it should be possible to revise CAD-Documents only if the user connects it directly to a change task. Otherwise he needs to do it before or afterwards. The dialog should show all the open change tasks like on the user homepage.
Revise released objects only with a connected Change Notice
Cabling or Piping
It should be possible to transfer the length to the BOM insted only the quantity "each". Most smaller companies don't have a WTPart for each cable. They have a single WTPart for the complete cable reel and will cut them for each length by theme self.
....
I haven't yeat created a new idea because there are already many around. What are your thought's about that? Are you happy with the current compilation?
Since Creo and PDMLink are the "Main Products" of PTC, I would really expect more and a further development of these two products.
For me, the development of these two products are still far away from my expectations. Since three years I can't really tell, what new features are being showed. I still belief the development is being done by two different teams which don't talk with each other...
Thanks
Björn
↧
Using DefaultObjectFormProcessor we need to provide Javascript prompt (Yes/No)
Using DefaultObjectFormProcessor we have defined an action when user clicks menu/command. Based on status of EPMDocument we need to add hook/catch before the action method gets executed. Provide Javascript prompt (Yes/No). I need to invoke JAVASCRIPT action in preProcess() method. Based on Yes/No input the next Process method gets called or abort.
↧
Trying to use CollectionComponentConfig.xml to create a configuration
Trying to tweak existing and create a new configuration in <WT_HOME>/codebase/com/ptc/core/htmlcomp/collection/CollectionComponentConfig.xml
So that JSTable can specify what config to load to display dependency or not.
However, unable to make changes in this file effective. Is there loader that needs to load these preferences in DB? I did find a loader file but it didn't do anything
↧
Switch off checkout and checkin dialogbox for wtdocument within Windchill preference manager instead of Desktop Integration
Customer don't want the checkin/checkout dialogbox when he open a wtdoc document.
Current solution is: set Preference within the DesktopIntegration (DI) configuration.
Most of his users don't use the DI, so they are not able to switch off this behavior.
Suggestion to PTC: implement this setting within Windchill preference Manager.
↧
↧
Is "Import by Spreadsheet" able to reassign Life Cycles or Views on a WTPart?
Is "Import by Spreadsheet" able to reassign Life Cycles or Views on a WTPart?
↧
"View as SQL" disabled under query builder
Hello All,
I need to generate SQL statements for some existing QML's. For some of QML reports "View as SQL" option is disabled. "View as SQL" is working for OOTB QML files and few custom QML's where limited # of tables used in join.
Is there any constraint on query size to generat SQL statements?
Thanks,
Ashwini
↧
Change Object type using API
Hi Everyone,
I need help in changing Object type using API.
I want to know if any method exists that can change the object type.
Regards
Sudeep
↧
Locking objects in Windchill 10 promotion request workflow template
Hello,
I am trying to modify our promotion request template which was copied from the OOTB windchill one to lock objects when they are raised up for promotion,a dn then unlocked after they are approved by config management approvers. I have a call into PTC tech support but they are dragging their feet as usual getting back to me. Does anyone have insight into how this can be done. I know that it is some type of robot, and from reading the help, it says you must use tranistion robots in conjuction with the locks, but I am just having trouble putting it all together. The default template contains locks, and unlocks already but not in the places I need them. I tried to copy them and put in line, but something just is not working right. Any help would be greatly appreciated.
Thank you in advance for your assistance,
Buddy Hudson
CAD/PDM Adminstrator
Atlas Copco Drilling Solutions
↧
↧
PTC SLA Metrics
Are you successfully measuring PTC's support service level agreement adherance? I would like to know your success story. What are you measuring? How do you collect the data? How do you measure the data?
↧
Failed to save in CATIA V5-6R2014: 0000003378_AllCATPart.CATPart. -DriveLink on Multiusers_QA\0000003378_AllCATPart.CATPart is not opened. Why i am getting this error for Allinonecatpart checkin?
Failed to save in CATIA V5-6R2014: 0000003378_AllCATPart.CATPart. -DriveLink on Multiusers_QA\0000003378_AllCATPart.CATPart is not opened. Why i am getting this error for Allinonecatpart checkin?
↧
Unable to Check-In Part?
Hello,
I had to edit part information and need to check it back in. However, whenever I got to check the part in, I get an error stating "The SAP Attributes cannot be modified since the production part is already published". The part is in prototype state in Windchill and SAP.
I appreciate any input. Thank you.
↧