Quantcast
Channel: PTC Community : Discussion List - Windchill
Viewing all 5797 articles
Browse latest View live

in promotion request need to go back to intial screen to approve

$
0
0

When approving a change task/promotion request you need to go back a few screen to approve once you pressed the link to investigate the cad files.

this wasnt the situation in 9.1.any plans to fix?


How to document or baseline PartsLink classification schema

$
0
0

We are building our classification schema using Counterpart (10.1 M030), to be loaded into PartsLink.

 

How are other users documenting or baselining their schema?  Also, how are you sharing the schema for others to review prior to release?

 

Any help on what worked/did not work would be appreciated.

Office 32bit with DTI 64 bit Issue

$
0
0

All,

We have 64 bit Win 7 pro machines but our IT want us to run 32 bit MS Office 2010.  When we install DTI it has to be 64bit because of the OS

Has anyone seen issues such as word closing down with an error or Windows Explorer closing down unexpectedly?

 

We have seen this on a couple machines now so am now delaying rolling out DTI until we can fix this

 

Windchill 10.2 M020

 

Thanks in advance

 

Chris

La fonction Lock

$
0
0

Bonjour à tous et toutes les membres de PTC et je vous souhaite une trés bonne année 2015

 

J'ai une question concernat la fonction Lock de Life Cycle.

On faite je comprend pas vraiment l'utilité de la fonction Lock et aussi comment s'mplique dans un cycle de vie?

 

Par exemple j'ai un cycle de vie avec 4 statut (In work ---->Approver------>Released--------->Product Release),

Est ce que la fonction Lock peut me service de bloquer le statut Released jusqu'à ce que je donne le feu vert pour aller au statut suivant Product Release par exemple?

Si oui,comment ça fonctionne ? est ce que c'est manuellement ou automatique ? (pour pouvoir déclencher la continuité le process de ce cycle de vie aprés)

 

Merci et j'éspére que c'est compréhensible

 

Cordialement

Creo View Adapters - publishing certain objects

$
0
0

To all Windchill 10.1 admins,

 

Is it possible to have have the Creo View Adapters publish only vertain objects?

 

I have a CAD worker that is publishing fine it is just getting backed up with so many parts when users check-in large assemblies. Sometimes there are 1500-2000 parts. Ahy way to not publish what has already been published if I dont want to?

 

Thanks in advance for your help,

 

Buddy Hudson

Java Error!

$
0
0

Hi,

 

Can somebody help me howto fix this? I'm using java 8 update 25.

 

Untitled.jpg

Thanks in advance!!

Change Management Customization

$
0
0

Does anyone have a detail, concise document on the steps to customize the change management forms and workflow associated with change request?

Things that we have identified to change are the change request form itself, the workflow process to add a few steps for signoffs and the roles that need populated with user names.

We are running Windchill/PDMLink 10.0 m040 with Creo2 m100.

Modifying Group Access Rights

$
0
0

Hi Everyone,

 

How do I modify the rights for Groups in the Manage Security screen?

 

Right now, all the checkboxes are disabled.

 

Thanks,

Capture.PNG


Windchill Upgradation From 10.1 M010 to 10.2 F000

$
0
0

Hi all,

 

Good Day To You...

 

 

I'm trying to upgrade Windchill PDMLink 10.1 M010 to 10.2 F000. For this, I've gone through related materials provided by PTC and got some idea.

 

But, as I'm performing this task for the first time, I've been strucking up at some points.

 

I need step by step procedure to do this task in clear manner

 

Request you to provide your valuable information/steps for this task ( Feel happy if provide screen shots)..

Note : I'm using SQL SERVER 2008 R2 as database.

 

Thanks in advance.

How do I load a previous version drawing and assembly into workspace?

$
0
0

Good afternoon:

 

Can anyone guide me to how I can load a previous version drawing and corresponding assembly model into workspace?

I know how to look at the history tab in the drawing information but I don't know how to open it in Creo.

When ever I try to open a previous version, the drawing updates with the latest part models.

I need the models at the version where the drawing assembly was saved, not the latest.

 

Creo 2.0 (M090) and Windchill PDM Essentials 10.2 (M010).

 

Thank you.

~Benito.

How can we create a child part in windchill using java api?

$
0
0

Hi friends,

 

How can we create a child part in windchill using java api?

different duty cycles for parts in an assembly

$
0
0

Hello everyone,

 

for a system I'm modeling in WQS right now, I have the situation that some assemblies of the system contain parts with different duty cycles. Those duty cycles should be considered for calculating the failure rate of the assembly. Unfortunately I couldn't get it to work as I want to. I have an easy example for what I mean:

Unbenannt1234.bmp

In this example the failure rate of the assembly "3" should be 1,5 and not 2,0 as calculated since one of the parts (Part "3.2") just has a duty cycle of 50%.

 

I know that you can control the effect of the duty cycle on the failure rate via the calculation model of the highest level assembly in the system. I have tried all the calculation models but as I can see there is only two options: The duty cycle of the assembly affects the failure rate or the duty cycle has no effect at all on the failure rate. Is there any way to set the system tree up so the duty cycles of the parts themselves affect the calculated failure rate?

 

Thanks and best wishes,

Torben Bartels

please suggest best practice for publishing DXF and PDF by using windchill 10.1

$
0
0

please suggest best practice for publishing DXF and PDF  by using windchill 10.1

Applets are Failed to Load

$
0
0

Hello All,

 

On Monolithic Windchill Server 10.1M040, All Applets are failed to load.

 

Its shows a message in Pop up's as below,

 

The following error occurred during initialization: The operation:   "getGlobalDomain" failed.

Nested exception is: wt.util.WTRemoteException: Unable to invoke remote method

Nested exception is: wt.util.WTRemoteException: Unable to locate method server

Nested exception is: wt.util.WTRemoteException: Unable to locate method server

Nested exception is: wt.util.WTRemoteException: Unable to get server

Nested exception is: java.security.AccessControlException: access denied ("java.net.SocketPermission" "127.0.0.1:5002" "connect,resolve")

 

 

Please guide us to solve this.

 

Regards,

Vivek

Creo View

$
0
0

We are looking to get a program that our Tech. Publications can use to get different views of Parts and Assemblies for the Manuals.

 

I was looking at using Creo View for this but apparently you can't connect Creo View to Windchill.

 

So does anyone know what I can use to connect to Windchill and view our Cad Documents? I don't want to have to purchase a full blown Creo License for this simple task.

 

Thanks in advance for any suggestions!


Create New Document fails to browse to file

$
0
0

Wew are trying to create a new document in WIndchill. We navigate to the Windchill folder we wanr, then select New Document. The type menu comes up, select and Next. In this view, we select Browse to get the file from disk we want to add. We get to the network drive and the system will not let some users naviagte through the folders to the file. We try to navigate outside PDMLink to be sure it isn't a folder permission issue and we can get to the file. The 2 sysadmins can browse to the file on their machines. I login in as the user having problems on my machine and no problems. We have not chnaged any settings and IT hasn't done any patch rollouts to the OS. All machines were reboot with the same results. We then checked Java versions, the syadmins are on 1.7.0_05 32-bit and 1.7.0_06 64-bit and the user with the issues is on a version of 1.6.0_12 64-bit. All systems are runing Windows 7-64bit.

We can get IT to update to only those levels of 1.7 and nothing newer as they haven't approved newer releases at corporate.

 

Any comments or suggestions would be appreciated.

Republish only drawings using WVS Job Scheduler Administration

$
0
0

We recently deleted all viewables of EPM Doc's (all Pro/E, Creo) from the system because they were published with rules that we've now changed.

 

On a rehosted test server we tested republishing all - takes a while.  We'd like now to only republish drawings, and if possible only the latest Version of each.

 

On the Job Scheduler UI, there are a number of OTB "Jobs" including: PublishAllEPMDocsLatestNoRepresentation.  This is what we want but would like to exclude .PRT, .ASM.

We've asked PTC tech support how to create a custom job but haven't yet heard back.

 

Question: Does anyone have such a custom job?  Would you be willing to share?

 

thanks

Windchill Workgroup Manager

$
0
0

Hi everybody!

 

I just want to ask if WWGM can be written in other not supported files like intergraph, staroffice, zwcad??

 

 

Thanks,

Luar

how to display alias attribute of part on the document attached as a described by document

$
0
0

I hav an alias attribute for example volume.I want it to be displayed it on the document which i will attach as a described by document.

Windchill Menu

$
0
0

Hi!

 

Can you teach me where is the file to customize the menu in winchill and how?

 

Like this one.

Untitled.jpg

 

Thanks,

Luar

Viewing all 5797 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>